X5 II is a dry type milling machine for materials such as Zirconia, PMMA, PEEK, WAX, Composite, Hybrid Resin, Sintering metal, etc., featuring the following functions.
1. Stable System
- The machine is made basis of professional experience.
- Dental Plus enhanced the hardware stability and used the user-friendly software for our customer to get more accurate milling results.
2. Simultaneous 5-axis & Half Jig
- Use the half jig and simultaneous 5-axis motion to create more free tilting angle.
- Minimize undercuts during milling to ensure high quality and precision without correction after milling.
- When milling the front part of the material, 90 degree milling is also possible.
3. Touch Screen : A touch screen is fitted for your convenience.
4. 9 Tool Pocket : Install the milling tools at once depending on the material and use them conveniently.
5. Trendy Design & Spacious Milling Room
- Its simple and stylish design goes well with everything in the clinic and lab.
- The milling room is spacious, making it easy for the user to work.
6. Cleaning Position : It is easy to manage by controlling the proper location for maintenance and cleaning.
7. Following Guide : Easy Setup & Auto-Calibration
BX4 II is a wet type milling machine for materials such as Pre-Mill Abutment(Titanium Blank), Glass Ceramics(Lithium Disilicate), Hybrid Resin, etc., featuring the following functions.
1. Major Points
- Optimized machine for custom abutment milling.
- Installed a jig for 11 pre-milled for custom abutments milling.
- Fast and precise results can be obtained due to 11 customized abutment milling with high productivity.
- Auto-calibration provides accurate concentricity.
- Milling existing ceramic affiliate blocks such as glass ceramic, resin ceramic, lithium disilicate and etc.
- It can be milled all at once by installing 10 blocks.
- Fast and precise results can be obtained due to 10 glass ceramic blocks milling with high productivity.
- Auto-calibration provides accurate engagement surface height.
2. Reverse Jig
- Detailed groove representation by vertical milling is possible.
- One-day milling for everyone’s desire.
- Many types of Reverse jig
- Maintain high strength and high precision consistently by using special jig.
- No need to cut connectors by your hands after milling.
3. Easy Interface
- Providing perfect and full auto-calibration
- Measure the milling target position of the milling results and automatically enter them into the machine to provide the best results.
- The guide makes it easy for anyone to do auto-calibration.
BXL5 is for labs and a dry and/or wet type milling machine for materials such as Zirconia, PMMA, PEEK, WAX, Composite hybrid Resin, Sintering metal, Pre-Mill Abutment(Titanium Blank), Glass Ceramics(Lithium Disilicate), etc., featuring the following functions.
1. Custom Abutment (Occlusal Surface Machining) : BXL5 can address complex processes and procedures for customized shifts that are perfectly suited to the patient. With the possibility of the connector cutting it eliminates the complicated post-processing processes. Therefore, it is possible to compete with an integral prosthesis through alternating milling and glass ceramic that can accurately express grooves.
2. Temporary Tooth & Hybrid Resin : Temporary teeth without undercuts can be processed and can be used immediately, resulting in high patient satisfaction. Hybrid Resin can be processed too.
3. Glass Ceramic Milling for inlay, onlay, crown & veneer : Unlike other CAM/CAD milling machines that can only be milled one at a time, up to five glass ceramics can be processed with BXL5, which increases the efficiency of treating multiple patients at once.
4. Simultaneous 5-Axis & Half Jig : Use the half jig and simultaneous 5-axis motion to create more free tilting angle. Minimize undercuts during milling to ensure high quality and precision without correction after milling. When milling the front part of the material, 90 degree milling is also possible.
5. Easy Operation
- Design & Touch Screen
- Simultaneous 5-Axis & Half Jig
- Auto Tool Change – 10 Tool Pockets
- Auto-Calibration
- Following Guide
BX5 is for clinics and a dry and/or wet type milling machine for materials such as Zirconia, PMMA, PEEK, WAX, Composite hybrid Resin, Sintering metal, Pre-Mill Abutment(Titanium Blank), Glass Ceramics(Lithium Disilicate), etc., featuring the following functions.
1. Glass Ceramic Milling for inlay, onlay, crown & veneer : Unlike other CAM/CAD milling machines that are only possible to mill one at a time, up to five glass ceramics can be process with BXL5, which increases the efficiency of work that treat multiple patients at once.
2. Temporary Tooth : Temporary tooth without undercuts can be processed, so it can be used immediately, result to patients’ high satisfaction.
3. Custom Abutment (Occlusal Surface Machining) : BX5 can address complex processes and procedures for customized shifts that are perfectly suited to the patient. With the possibility of the connector cutting BX5 eliminates the complicated post-processing processes. Therefore, it is possible to compete with an integral prosthesis through alternating milling and glass ceramic that can accurately express grooves.
4. Surgical Guide : Experience the BX5 for powerful implant planning and surgical guides. Ensures accurate and safe implant treatment. Surgical guide milling is essential for successful surgery of increasing implants, and can be implemented within an hour, which can significantly reduce preparation time by comparing 3D printers and enabling precise milling.
5. Easy Operation
- Design & Touch Screen
- Simultaneous 5-Axis & Half Jig
- Auto Tool Change – 10 Tool Pockets
- Auto-Calibration
- Following Guide