-
- Aussteller 2023
-
Ausstellerverzeichnis
Anzeige
ELSODENT SAS
BP 50072 Herblay Avenue du Gros Chene 35
95612 CERGY PONTOISE CEDEX
Postfach 50072
95612 CERGY PONTOISE CEDEX
Frankreich
95612 CERGY PONTOISE CEDEX
Postfach 50072
95612 CERGY PONTOISE CEDEX
Frankreich
Company portrait
Innovative & clinically performant BIO+ dental product line is BPA-free, BisGMA|HEMA|TEGDMA-free
Innovative & clinically performant BIO+ dental product line is BPA-free, BisGMA|HEMA|TEGDMA-free
Produkte
Web: https://elsodent.com/en/produit/purefill2-bio/
Nano-hybrid, antero-posterior composite
BIO+: BPA-free, no addition of BisGMA, BisEMA, TEGDMA, HEMA
The first ELSODENT composite developed from an innovative formulation BPA-free, without any addition of BisGMA, BisEMA, TEGDMA, HEMA, to get a low toxicity composite. Its higher biocompatibility, due to the non-hydrolysable monomers contained in the matrix of the product, leads to a lower toxicity over time. It makes PUREFILL2 an essential product in our declared approach to public health.
Features
Low shrinkage (2%).
Does not stick to instruments.
High conversion rate > 70%.
Perfect consistency for better handling.
Stable over time, does not polymerize under the chair light.
Highly filled.
Depth of polymerization > 3mm.
Aesthetic. Excellent polishability.
Indications
Posterior restorations (class I, class II, MOD).
Anterior restorations (class III and class IV).
Class V cavities.
Aesthetic corrections (diastema, hypoplasia, discoloration).
3g syringe. VITA shades A1/B1 – A2 – A3 – A3,5 – B2 - C2 - Incisal - Bleach
To be used with BIO+ bonding HEALBOND MP
Available in flowable version PUREFILL FLOW
Nano-hybrid, antero-posterior composite
BIO+: BPA-free, no addition of BisGMA, BisEMA, TEGDMA, HEMA
The first ELSODENT composite developed from an innovative formulation BPA-free, without any addition of BisGMA, BisEMA, TEGDMA, HEMA, to get a low toxicity composite. Its higher biocompatibility, due to the non-hydrolysable monomers contained in the matrix of the product, leads to a lower toxicity over time. It makes PUREFILL2 an essential product in our declared approach to public health.
Features
Low shrinkage (2%).
Does not stick to instruments.
High conversion rate > 70%.
Perfect consistency for better handling.
Stable over time, does not polymerize under the chair light.
Highly filled.
Depth of polymerization > 3mm.
Aesthetic. Excellent polishability.
Indications
Posterior restorations (class I, class II, MOD).
Anterior restorations (class III and class IV).
Class V cavities.
Aesthetic corrections (diastema, hypoplasia, discoloration).
3g syringe. VITA shades A1/B1 – A2 – A3 – A3,5 – B2 - C2 - Incisal - Bleach
To be used with BIO+ bonding HEALBOND MP
Available in flowable version PUREFILL FLOW
Web : https://elsodent.com/en/produit/innocem-bio-new/
Brochure: https://www.calameo.com/elsodent/read/0031795081308358e7638
Adhesive, self-etching, dual-cure universal resin cement
BIO+: BPA-free, no addition of BisGMA, BisEMA, TEGDMA, HEMA
To be use in SOLO or DUO mode. It's up to you to choose according to the clinical situation!
UNIVERSAL
Powerful bonding strength on dentin, metal, Zirconia, composite, etched and silanisated ceramic.
Performant & Reliable
Outstanding Conversion (polymerization) Degree, for improved long-term performance and less toxicity
Aesthetic
3 shades: Translucent A2 – Opaque A2 & A3
Strong hiding power of opaque shades.
SOLO MODE
1 step only - Simple and reproductible protocol - Quick and Easy-to-use - No pre-treatment of the tooth required
Universal cementation: Metal, composite, etched or silanisated ceramic inlays, onlays, crowns and bridges. Ti-bases cementation
DUO MODE
With our adhesives systems, no activator needed (SMART CONCEPT)
Enanced bonding effectiveness with IPC technology
Indications
Maryland bridges of 2 to 3 elements - Root canal posts cementations (metallic or fiber posts) - Prosthondontic restorations with poor retention.
SMART CONCEPT
So easy-to-use with all our bonding systems range HEALBOND MP, HEALBOND MAX & H-BOND ELSODENT dual-cured products will make our adhesive systems dual without requiring an activator.
IPC TECHNOLOGY (Initiator Polymerization Contact)
The polymerization of INNOCEM is greatly facilitated and immediately initiated when it is in contact with the "adhesive" dentin coated with one of our adhesive systems.
Their polymerization accelerators interact immediately with the initiator/polymerization system of INNOCEM, to get an instant start of the "sealing process", even if the final polymerization is far to be completed. Thus, a powerful and definitive bonding of the prosthetic element will be ensured.
Brochure: https://www.calameo.com/elsodent/read/0031795081308358e7638
Adhesive, self-etching, dual-cure universal resin cement
BIO+: BPA-free, no addition of BisGMA, BisEMA, TEGDMA, HEMA
To be use in SOLO or DUO mode. It's up to you to choose according to the clinical situation!
UNIVERSAL
Powerful bonding strength on dentin, metal, Zirconia, composite, etched and silanisated ceramic.
Performant & Reliable
Outstanding Conversion (polymerization) Degree, for improved long-term performance and less toxicity
Aesthetic
3 shades: Translucent A2 – Opaque A2 & A3
Strong hiding power of opaque shades.
SOLO MODE
1 step only - Simple and reproductible protocol - Quick and Easy-to-use - No pre-treatment of the tooth required
Universal cementation: Metal, composite, etched or silanisated ceramic inlays, onlays, crowns and bridges. Ti-bases cementation
DUO MODE
With our adhesives systems, no activator needed (SMART CONCEPT)
Enanced bonding effectiveness with IPC technology
Indications
Maryland bridges of 2 to 3 elements - Root canal posts cementations (metallic or fiber posts) - Prosthondontic restorations with poor retention.
SMART CONCEPT
So easy-to-use with all our bonding systems range HEALBOND MP, HEALBOND MAX & H-BOND ELSODENT dual-cured products will make our adhesive systems dual without requiring an activator.
IPC TECHNOLOGY (Initiator Polymerization Contact)
The polymerization of INNOCEM is greatly facilitated and immediately initiated when it is in contact with the "adhesive" dentin coated with one of our adhesive systems.
Their polymerization accelerators interact immediately with the initiator/polymerization system of INNOCEM, to get an instant start of the "sealing process", even if the final polymerization is far to be completed. Thus, a powerful and definitive bonding of the prosthetic element will be ensured.
https://elsodent.com/en/produit/healbond-mp-bio/
Universal self-etching light-cure bonding agent
BIO+: BPA-free, no BisGMA, TEGDMA, nor addition of HEMA
For a smarter, faster and more efficient dentistry!
FEATURES
8th generation adhesive system (self-etching one step), which can also be used as an etch & rinse, 2 steps bonding system (with partial or total etch). Regardless the technique used, the results are always exceptional.
UNIVERSAL: Powerful shear bond strength to all surfaces: tooth structures, ceramic, composites, metal and zirconia
MULTI-MODE: Self-etching, selective etching or total etching.
MULTI-INDICATION : Direct & indirect restorations
SMART CONCEPT: Use within ELSODENT product range WITHOUT ACTIVATOR for dual-mode.
INDICATION
• Light-curing composites on tooth structures.
• Light-curing composites on metal (replacement of broken ceramic chips in mouth).
• With CORE D, dual-curing mode (core build-up), without activator.
• With INNOCEM, to bond ceramic veneers, root canal posts and Maryland bridges without activator.
Universal self-etching light-cure bonding agent
BIO+: BPA-free, no BisGMA, TEGDMA, nor addition of HEMA
For a smarter, faster and more efficient dentistry!
FEATURES
8th generation adhesive system (self-etching one step), which can also be used as an etch & rinse, 2 steps bonding system (with partial or total etch). Regardless the technique used, the results are always exceptional.
UNIVERSAL: Powerful shear bond strength to all surfaces: tooth structures, ceramic, composites, metal and zirconia
MULTI-MODE: Self-etching, selective etching or total etching.
MULTI-INDICATION : Direct & indirect restorations
SMART CONCEPT: Use within ELSODENT product range WITHOUT ACTIVATOR for dual-mode.
INDICATION
• Light-curing composites on tooth structures.
• Light-curing composites on metal (replacement of broken ceramic chips in mouth).
• With CORE D, dual-curing mode (core build-up), without activator.
• With INNOCEM, to bond ceramic veneers, root canal posts and Maryland bridges without activator.
Web: https://www.elsodent.com/en/portfolio-item/ultima-2/
Video: https://youtu.be/pWqQaeITo9w
Multi-wave, Multi-mode, Multi-indication 4-years warranty LED Curing-Light
ALL-IN-ONE
ULTIMA features a unique lens composed of mini LED (UV+blue+white) that can be combined together or used alone so different operating modes are available:
4 curing modes (composites, cements, brackets, cavity liners) with standard, soft, boost mode & multi-cycle boost mode.
2 diagnostic modes (visualization of remaining cement and composite, transillumination).
Wide emission spectrum (385 - 490 nm), to activate all photo-initiators, including the latest generation such as Camphorquinone, Lucirine®, TPO, PPD
XL-DIAMETER LENS (12,3mm) Perfect for general practice and orthodontic sessions
ERGONOMICS: Easy handling pen-like aluminum device, ultra-light weight (95g), easy intra-oral access for optimal practrician and patient comfort.
EASY USE & MAINTENANCE
Charging directly on dock station. Continuous use with a 2nd battery + universal charger
(option). Easy to replace/exchange standard battery.
Video: https://youtu.be/pWqQaeITo9w
Multi-wave, Multi-mode, Multi-indication 4-years warranty LED Curing-Light
ALL-IN-ONE
ULTIMA features a unique lens composed of mini LED (UV+blue+white) that can be combined together or used alone so different operating modes are available:
4 curing modes (composites, cements, brackets, cavity liners) with standard, soft, boost mode & multi-cycle boost mode.
2 diagnostic modes (visualization of remaining cement and composite, transillumination).
Wide emission spectrum (385 - 490 nm), to activate all photo-initiators, including the latest generation such as Camphorquinone, Lucirine®, TPO, PPD
XL-DIAMETER LENS (12,3mm) Perfect for general practice and orthodontic sessions
ERGONOMICS: Easy handling pen-like aluminum device, ultra-light weight (95g), easy intra-oral access for optimal practrician and patient comfort.
EASY USE & MAINTENANCE
Charging directly on dock station. Continuous use with a 2nd battery + universal charger
(option). Easy to replace/exchange standard battery.
https://elsodent.com/en/produit/core-d-bio/
Dual-cure core build-up material
BIO+: BPA-free, no BisGMA, BisEMA, TEGDMA, nor addition of HEMA
ADVANTAGES
Very thixotropic. Does not flow. No matrix needed. Improves operating field vision
Hardness equivalent to dentin. No difference between the composite and dentin during trimming
Radio-opaque
High flexural strength = 135 MPa
High compressive strength ~ 330 MPa
High conversion rate = 70%
SMART CONCEPT: Easy-to-use with bonding systems HEALBOND MP & HEALBOND MAX WITHOUT ACTIVATOR
INDICATIONS
Restorations on vital on non-vital teeth
To seal root canal posts, in conjunction with a dual-cure bonding system (eg. HEALBOND MP).
To be used with ELSODENT bonding systems HEALBOND MP or H-BOND
Available in flowable version CORE D FLOW
Dual-cure core build-up material
BIO+: BPA-free, no BisGMA, BisEMA, TEGDMA, nor addition of HEMA
ADVANTAGES
Very thixotropic. Does not flow. No matrix needed. Improves operating field vision
Hardness equivalent to dentin. No difference between the composite and dentin during trimming
Radio-opaque
High flexural strength = 135 MPa
High compressive strength ~ 330 MPa
High conversion rate = 70%
SMART CONCEPT: Easy-to-use with bonding systems HEALBOND MP & HEALBOND MAX WITHOUT ACTIVATOR
INDICATIONS
Restorations on vital on non-vital teeth
To seal root canal posts, in conjunction with a dual-cure bonding system (eg. HEALBOND MP).
To be used with ELSODENT bonding systems HEALBOND MP or H-BOND
Available in flowable version CORE D FLOW
Resin for temporary bridges and crowns
BIO+: BPA-free, no BisGMA, TEGDMA, nor addition of HEMA
ADVANTAGES
INDIRECT METHOD: with a preliminary silicone impression
DIRECT METHOD: Temporary crowns can be made directly in mouth within 3 min.
Thixotropic. does not flow and can be injected directly into the mouth around the abutment tooth
High flexural strength and slight resilience
Very thin oxygen inhibition layer
Rebasable. A new layer can be applied on top of an existing one up to 2 or 3 days after max.
Setting time = 2min 45s
INDICATIONS
PHOENIX: perfect for unit crown and small bridges
PHOENIX MD: ideal for longer bridges
BIO+: BPA-free, no BisGMA, TEGDMA, nor addition of HEMA
ADVANTAGES
INDIRECT METHOD: with a preliminary silicone impression
DIRECT METHOD: Temporary crowns can be made directly in mouth within 3 min.
Thixotropic. does not flow and can be injected directly into the mouth around the abutment tooth
High flexural strength and slight resilience
Very thin oxygen inhibition layer
Rebasable. A new layer can be applied on top of an existing one up to 2 or 3 days after max.
Setting time = 2min 45s
INDICATIONS
PHOENIX: perfect for unit crown and small bridges
PHOENIX MD: ideal for longer bridges
Web: https://elsodent.com/en/produit/seal-temp-seal-temp-s-bio/
BIO+: BPA-free, no BisGMA, TEGDMA, nor addition of HEMA
Temporary resin-based cements
ADVANTAGES
Perio-friendly
Thanks to the smooth surface of the cement, the gum completely heals within 2 to 3 days
Any procedure (impression, etc) can be performed withtout facing bleeding problems of the gum
Suitable use on vital and non-vital teeth
Time saving
The cement sticks to the intrados of the temporary crowns: The prepared teeth always remain clean
Before placing the temporary crown back on the tooth:
SEALTEMP: just apply a new layer of cement. If a supra-occlusion occurs, trim the external surface of the temporary crown.
SEALTEMP S: before applying a new layer of cement, remove the old one with tweezers.
INDICATIONS
2 complementary cements for all clinical cases
SEAL TEMP - Strong retention strength
Temporary cementation of temporary crowns on low abutment teeth.
Temporary cementation of long-term temporary crowns (2 months).
Semi-definitive cementation of crowns on implant, except prosthetics elements in Zirconia
SEAL TEMP S - Classic retention strength
Temporary cementation of temporary crowns on normal abutment teeth and implants
Temporary cementation of definitive veneers to validate aesthetic
25 YEARS OF CLINICAL SUCCESS! (DENTAL ADVISOR ++++1/2 - 2015)
BIO+: BPA-free, no BisGMA, TEGDMA, nor addition of HEMA
Temporary resin-based cements
ADVANTAGES
Perio-friendly
Thanks to the smooth surface of the cement, the gum completely heals within 2 to 3 days
Any procedure (impression, etc) can be performed withtout facing bleeding problems of the gum
Suitable use on vital and non-vital teeth
Time saving
The cement sticks to the intrados of the temporary crowns: The prepared teeth always remain clean
Before placing the temporary crown back on the tooth:
SEALTEMP: just apply a new layer of cement. If a supra-occlusion occurs, trim the external surface of the temporary crown.
SEALTEMP S: before applying a new layer of cement, remove the old one with tweezers.
INDICATIONS
2 complementary cements for all clinical cases
SEAL TEMP - Strong retention strength
Temporary cementation of temporary crowns on low abutment teeth.
Temporary cementation of long-term temporary crowns (2 months).
Semi-definitive cementation of crowns on implant, except prosthetics elements in Zirconia
SEAL TEMP S - Classic retention strength
Temporary cementation of temporary crowns on normal abutment teeth and implants
Temporary cementation of definitive veneers to validate aesthetic
25 YEARS OF CLINICAL SUCCESS! (DENTAL ADVISOR ++++1/2 - 2015)
Web: https://elsodent.com/en/produit/notredam-bio/
Multipurpose light-cure liquid dam
BIO+: No BPA, no BisGMA, BisEMA, TEGDMA, nor addition of HEMA
ADVANTAGES
Low exothermic reaction to avoid harmful reaction of the mucosa
Excellent thixotropy for an easy setting
Versatile multi-purpose
Blue for a good contrast
INDICATIONS
Endodontic
To insure a waterproof joint of the rubber dam around a tooth during an endodontic session.
To build temporary tooth walls during endodontic sessions, to hold the irrigating liquid in place
Restorative dentistry
To hold Teflon® film in place when luting aesthetic veneers, or making a class II composite involving the contact point
Prosthodontic
To fill up undercuts before impression, to avoid tearing off the material
Bleaching
Protection of soft tissues during bleaching process
Multipurpose light-cure liquid dam
BIO+: No BPA, no BisGMA, BisEMA, TEGDMA, nor addition of HEMA
ADVANTAGES
Low exothermic reaction to avoid harmful reaction of the mucosa
Excellent thixotropy for an easy setting
Versatile multi-purpose
Blue for a good contrast
INDICATIONS
Endodontic
To insure a waterproof joint of the rubber dam around a tooth during an endodontic session.
To build temporary tooth walls during endodontic sessions, to hold the irrigating liquid in place
Restorative dentistry
To hold Teflon® film in place when luting aesthetic veneers, or making a class II composite involving the contact point
Prosthodontic
To fill up undercuts before impression, to avoid tearing off the material
Bleaching
Protection of soft tissues during bleaching process
web: https://elsodent.com/en/produit/duroc-bio/
Resin-based bite registration material, implant transfer caps splinting
BIO+: No BPA, no BisGMA, BisEMA, TEGDMA, nor addition of HEMA
ADVANTAGES
Thixotropic : does not flow between teeth
Fast setting time ~ 40 s
Blue shade for a strong contrast
Easy to trim excess
The most rigid bite registration materials available
High flexural strength
Negligible linear shrinkage
Burns with no residue
INDICATIONS
IMPLANTOLOGY
Fixing together implant transfer caps before final impression
Bite registration
To fix quickly and perfectly the two parts of a bridge infrastructure
To elaborate inlays cores in direct method
Resin-based bite registration material, implant transfer caps splinting
BIO+: No BPA, no BisGMA, BisEMA, TEGDMA, nor addition of HEMA
ADVANTAGES
Thixotropic : does not flow between teeth
Fast setting time ~ 40 s
Blue shade for a strong contrast
Easy to trim excess
The most rigid bite registration materials available
High flexural strength
Negligible linear shrinkage
Burns with no residue
INDICATIONS
IMPLANTOLOGY
Fixing together implant transfer caps before final impression
Bite registration
To fix quickly and perfectly the two parts of a bridge infrastructure
To elaborate inlays cores in direct method
web: https://elsodent.com/en/produit/harmony/
Vinyl polyxilane impression materials
ADVANTAGES
Specially developed to provide a very precise and highly hydrocompatible impression material
Matt appearance for a perfect and fast reading.
Correction possible right away, if needed
High compressive strength
Good dimensional stability < 0.2%
Excellent coverage after distorsion > 99%
Light, Medium and Putty, available in Regular or Fast version
Vinyl polyxilane impression materials
ADVANTAGES
Specially developed to provide a very precise and highly hydrocompatible impression material
Matt appearance for a perfect and fast reading.
Correction possible right away, if needed
High compressive strength
Good dimensional stability < 0.2%
Excellent coverage after distorsion > 99%
Light, Medium and Putty, available in Regular or Fast version
https://elsodent.com/en/produit/g-etch/
Etching gel - Phosphoric acid 38%
ADVANTAGES
Even more efficient
High thixotropy, doesn’t flow
Ultra-fast and easy rinsing
Excellent contrast. Blue or Green translucent gel
Very easy extrusion
Non-drying gel.
3-years Lifetime
Available in Blue & Green shade, Ideal for general practice & orthodontics
Jumbo kit (50ml) | Maxi kit (3ml) | Mini kit 1,2ml
Etching gel - Phosphoric acid 38%
ADVANTAGES
Even more efficient
High thixotropy, doesn’t flow
Ultra-fast and easy rinsing
Excellent contrast. Blue or Green translucent gel
Very easy extrusion
Non-drying gel.
3-years Lifetime
Available in Blue & Green shade, Ideal for general practice & orthodontics
Jumbo kit (50ml) | Maxi kit (3ml) | Mini kit 1,2ml
Web: https://elsodent.com/en/produit/cirus/
Nano-hybrid, antero-posterior composite 4.5g
ADVANTAGES
Economic syringe 4,5g
Does not stick to instruments
Outstanding flexural strength = 130 MPa
Polymerization depth up to 4mm
Reduced polymerization stress
Low shrinkage
Highly filled (75% by mass)
Easy condensable in posterior use
Easy handling in anterior use
INDICATIONS
Anterior restorations (class III and class IV)
Posterior restorations (class I, II and MOD)
Class V restorations
Aesthetic corrections
Diastema, hypoplasia, discoloration
Composite veneers (direct method)
Syringe 4,5g. VITA shades A1/B1 - A2 - A3 - A3,5 - B2 - C2 - Incisal – Bleach
To be used with bonding H-BOND
Available in flowable version CIRUS FLOW
Nano-hybrid, antero-posterior composite 4.5g
ADVANTAGES
Economic syringe 4,5g
Does not stick to instruments
Outstanding flexural strength = 130 MPa
Polymerization depth up to 4mm
Reduced polymerization stress
Low shrinkage
Highly filled (75% by mass)
Easy condensable in posterior use
Easy handling in anterior use
INDICATIONS
Anterior restorations (class III and class IV)
Posterior restorations (class I, II and MOD)
Class V restorations
Aesthetic corrections
Diastema, hypoplasia, discoloration
Composite veneers (direct method)
Syringe 4,5g. VITA shades A1/B1 - A2 - A3 - A3,5 - B2 - C2 - Incisal – Bleach
To be used with bonding H-BOND
Available in flowable version CIRUS FLOW
Web: https://elsodent.com/en/produit/h-bond/
Self-etching light-cure universal bonding agent
ADVANTAGES
UNIVERSAL
Powerfull shear bond strength to tooth structures, ceramic, metal and zirconia
SIMPLE
Quick and easy to use.
Can be used with or without etching
Shear bond strength ~ 13,9 MPa
INDICATIONS
Light-cure composites on tooth structures
To desensitize cervical regions and free dentin areas
Dual-cure mode (core build-up) without activator
Self-etching light-cure universal bonding agent
ADVANTAGES
UNIVERSAL
Powerfull shear bond strength to tooth structures, ceramic, metal and zirconia
SIMPLE
Quick and easy to use.
Can be used with or without etching
Shear bond strength ~ 13,9 MPa
INDICATIONS
Light-cure composites on tooth structures
To desensitize cervical regions and free dentin areas
Dual-cure mode (core build-up) without activator
Web: https://elsodent.com/produit/endoneedle/
Canulas for root canal irrigation
Lateral opening and blunt end
ADVANTAGES
Lateral opening and blunt end
Compared to needles with apical opening, a needle with lateral opening and blunt end will prevent any risk of damage at the apex of the tooth (acute desmondontitis), especially with a chronically infected tooth (eg.: widely opened apex) or when the apessification is not complete.
The small diameter of the opening allows enough water pressure to expel the debris from the canal.
INDICATIONS
Cleaning root canals without risking a perforation of the apex
G30 - purple
G27 - yellow
G23 - blue
Canulas for root canal irrigation
Lateral opening and blunt end
ADVANTAGES
Lateral opening and blunt end
Compared to needles with apical opening, a needle with lateral opening and blunt end will prevent any risk of damage at the apex of the tooth (acute desmondontitis), especially with a chronically infected tooth (eg.: widely opened apex) or when the apessification is not complete.
The small diameter of the opening allows enough water pressure to expel the debris from the canal.
INDICATIONS
Cleaning root canals without risking a perforation of the apex
G30 - purple
G27 - yellow
G23 - blue
Web : https://elsodent.com/en/produit/topbase-bio/
Video : https://youtu.be/o4kyGWlNByk
Thermoplastic plate to reline dentures
BIOCOMPATIBLE BPA-free, BisGMA, TEGDMA, HEMA
Indication
Semi-definitive, hard relining of dentures.
Very easy and fast use
- No mixing of products
- A perfect relining in 10 to 15 minutes only!
- With a good air dryer, or a heat air gun
Advantages
- TopBase stick directly and strongly to any type of resins used for dentures
- Very economical
- Aesthetic
- Accurate recording of details of the mucosa.
- https://elsodent.com/en/produit/topbase-bio/
- Can be re-shaped anytime by re-heating it as many times as needed!
- Non toxic
Video : https://youtu.be/o4kyGWlNByk
Thermoplastic plate to reline dentures
BIOCOMPATIBLE BPA-free, BisGMA, TEGDMA, HEMA
Indication
Semi-definitive, hard relining of dentures.
Very easy and fast use
- No mixing of products
- A perfect relining in 10 to 15 minutes only!
- With a good air dryer, or a heat air gun
Advantages
- TopBase stick directly and strongly to any type of resins used for dentures
- Very economical
- Aesthetic
- Accurate recording of details of the mucosa.
- https://elsodent.com/en/produit/topbase-bio/
- Can be re-shaped anytime by re-heating it as many times as needed!
- Non toxic
Produktgruppen
...
- [{"text":"Zahn\u00e4rztlicher Bereich","link":"\/ids-cologne-aussteller\/ausstellerverzeichnis\/?fw_goto=aussteller\/index&&tab=1&haupt=1","children":{"106000":{"text":"Spezialger\u00e4te","link":"\/ids-cologne-aussteller\/ausstellerverzeichnis\/?fw_goto=aussteller\/index&&tab=1&haupt=1","children":{"106140":{"text":"Lichtpolymerisationsger\u00e4te (ZA)","link":"\/ids-cologne-aussteller\/ausstellerverzeichnis\/?fw_goto=aussteller\/index&&tab=1&haupt=1","children":null}}},"108000":{"text":"Zahn\u00e4rztliche Werkstoffe","link":"\/ids-cologne-aussteller\/ausstellerverzeichnis\/?fw_goto=aussteller\/index&&tab=1&haupt=1","children":{"108010":{"text":"Abformmaterialien","link":"\/ids-cologne-aussteller\/ausstellerverzeichnis\/?fw_goto=aussteller\/index&&tab=1&haupt=1","children":null},"108020":{"text":"\u00c4tzmittel und Adh\u00e4sive","link":"\/ids-cologne-aussteller\/ausstellerverzeichnis\/?fw_goto=aussteller\/index&&tab=1&haupt=1","children":null},"108030":{"text":"Befestigungsmaterialien","link":"\/ids-cologne-aussteller\/ausstellerverzeichnis\/?fw_goto=aussteller\/index&&tab=1&haupt=1","children":null},"108040":{"text":"Bissregistriermaterialien","link":"\/ids-cologne-aussteller\/ausstellerverzeichnis\/?fw_goto=aussteller\/index&&tab=1&haupt=1","children":null},"108050":{"text":"Composites","link":"\/ids-cologne-aussteller\/ausstellerverzeichnis\/?fw_goto=aussteller\/index&&tab=1&haupt=1","children":null},"108070":{"text":"Tempor\u00e4re Verschlussmaterialien","link":"\/ids-cologne-aussteller\/ausstellerverzeichnis\/?fw_goto=aussteller\/index&&tab=1&haupt=1","children":null},"108080":{"text":"Zemente","link":"\/ids-cologne-aussteller\/ausstellerverzeichnis\/?fw_goto=aussteller\/index&&tab=1&haupt=1","children":null},"108090":{"text":"Provisorische Kronen- u. Br\u00fcckenmaterialien","link":"\/ids-cologne-aussteller\/ausstellerverzeichnis\/?fw_goto=aussteller\/index&&tab=1&haupt=1","children":null},"108110":{"text":"Wurzelf\u00fcllmaterialien","link":"\/ids-cologne-aussteller\/ausstellerverzeichnis\/?fw_goto=aussteller\/index&&tab=1&haupt=1","children":null}}}}}]
Presseinformationen
Pressefach wird geladen...