Everall7 Sp. z o.o.

Villacryl H Plus heat-curing acrylic resins, intended for denture bases, removable full or partial prostheses and for the indirect relining of removable prostheses.
• Heavy metals free
• Biologically neutral
• High mechanical strength
• Comes in 5 colors: transparent (0), milk pink veined (V2), dark pink veined (V3), pink veined (V4) pink (T4)

Advantages:
• Relined by soft and hard relines
• Color stability
• Highly aesthetic

Villacryl H Rapid is acrylic material for rapid thermal polymerization that has been specially prepared to accelerate the technological process in the dental and technical laboratories. Supports making plates of removable full and partial dentures as well as indirect relining of dentures. Fast polymerization shortens the process time by up to half.
• Heavy metals free
• Biologically neutral
• Villacryl H Rapid comes in 3 colors: transparent (0), milky pink veined (V2), pink veined (V4)
• Villacryl H Rapid FN: pink veined (V4)

Advantages:
• Saves approximately 60 minutes in denture preparation time
• Plastic consistency of the acrylic mass during stuffing in a polymerization flask

Villacryl SP is a fluid cold-curing acrylic resin for frameworks, complete and partial dentures, with the use of hydrocolloid masses, silicones for pre-pouring and duplicating silicones. Useful for repair and indirect relining as well.
• Heavy metals free
• Biologically neutral
• 3 colors: transparent (0), milk pink veined (V2), pink veined (V4)

Advantages:
• Rapid denture production by pouring technique using a silicone matrix
• Easy to prepare and process
• Good masking of the metal parts of the denture

Villacryl S is a self-curing acrylic resin intended for the repair and indirect relining of removable dentures.
• Heavy metals free
• Biologically neutral
• Villacryl S comes in 3 colors: transparent (0), milky pink veined (V2), pink veined (V4), pink (T4)

Advantages:
• Easy to prepare and process
• Quick to manufacture, thanks to the good connection to hot-curing materials
• Range of colours guarantees high aesthetics of the repair

Villacryl Ortho a colorless acrylic material for low-temperature pressure polymerization intended for the fabrication of removable orthodontic appliances by pouring powder on the model and soaking with monomer (“salt and pepper” method) and for repairing orthodontic appliances.
• Possibility of individual creation of a color of any saturation
• Economical, just add dye to get a variety of colors
• Low absorption of fluids from the oral cavity
• Biologically neutral

Advantages:
• Thanks to the quick gelation, the mass does not run off the plaster model
• Perfect transparency of the acrylic mass
• Easy to prepare and process

Villacryl Ortho MIX is a colorless acrylic material of cold polymerization intended for the production of removable orthodontic appliances by the pouring method and acrylic dough and for the repair of orthodontic appliances.
• Economical, just add dye to get a variety of colors
• High mechanical strength
• Biologically neutral

Advantages:
• Versatility of applications in the dental and technical laboratories
• Easy to prepare and process

Color concentrates for Villacryl Ortho allow you to get any color of the orthodontic appliance.
• Comes in 8 colors, giving the possibility of creating intermediate colors

Advantages:
• Possible to individually create color of any saturation
• Provides the patient with comfort of use
• Devices made with Villacryl Ortho, with the use of various color concentrates, have high aesthetic value and color stability

Cold-cured acrylic material intended for temporary relining of dentures directly in the patient’s mouth.
• Color: pink
• Low polymerization temperature in the patient’s mouth

Advantages:
• Convenient for use in a dentist’s office
• Easy to prepare and process
• Enables quick denture relining
• Bonds well with the denture plate
• Provides the patient comfort of using the denture
• Heavy metals free
• Biologically neutral

Stodent II is a model plaster type 2 recommended for filling cans when making removable dentures with hot-curing acrylic materials and for other auxiliary works.
• Optimal representation of details
• Optimum fluidity
• Color: white

Advantages:
• Easy to mix
• Easy to process
• Easy release of finished denture from the flask

Stodent III is a type 3 hard dental stone indicated for making antagonist and working models in removable and frame dentures.
• Available colors: yellow, blue, light green
• Light green color enriched with mango aroma
• Low expansion
• Good mechanical properties

Advantages:
• Smooth surface
• Facilitated model production due to high thixotropicity
• High fracture resistance during release from the impression

Stodent III Ortho is a type 3 hard dental stone recommended for archival, diagnostic and working models in the fabrication of removable orthodontic appliances.
• Glossy white color
• A small expansion

Advantages:
• Smooth surface
• Easy to prepare and process
• Surface resistance to abrasion

Stodent III Arti is a type 3 dental stone recommended for mounting of models in articulators.
• Color: yellow

Advantages:
• Short setting time
• Does not run off when in use

Stodent IV is an extra hard type 4 dental die stone, recommended for working models of permanent skeletal dentures and flexible dentures, combined works, post-implantation prostheses.
• Available colors: brown, cream, ashen
• It is available in a cream color with a vanilla scent and an ashen color with a strawberry scent
• A small expansion
• Liquidity

Advantages:
• Very good detail reproduction
• Smooth surface
• High resistance to mechanical damage

Stodent IV Base is a type 4 dental die stone recommended for the foundations of split models. It does not require the use of a vibrating table.
• Color: terracotta red

Advantages:
• Excellent fluidity
• Optimized expansion, compatible with expansion of the stone from which the dental arch is made

Description
Stodent V is type 5 an extra hard dental stone, recommended for highly precise prosthetic works requiring compensation for shrinkage of various materials.
• Color: orange

Advantages:
• Very good detail reproduction
• Smooth surface
• Very high resistance to mechanical damage

Villacryl Thermo Press is a polyamide-based thermoplastic material. It is dedicated to all removable dentures such as: complete dentures, partial, retention elements in framework dentures, microprothesis, splints and space maintainers.
• Microcrystalline structure
• Working on a 4th class stone model
• No residual MMA monomer
• Available colors: 0, T2, T3, T4

Advantages:
• Easy to process and polish
• Low absorption of fluids from the oral cavity
• Optimum flexibility and hardness of the denture
• Biocompatible pigments
• Most injection molding machines available on the market can be used

Villacryl Thermo Iso-Clear is a transparent light-curing insulator designed to isolate polyamide thermoplastics from gypsum. It is efficient and reliable, resistant to high temperatures and guarantees perfect insulation with just a single layer.
• High temperature resistant
• Optimal density and fluidity

Advantages:
• Perfect smooth surface
• Due to high temperature resistance, provides a perfect surface of the injected denture, which eliminates the need for mechanical processing on the mucosal side
• Single layer is enough to effectively isolate the model

Disposable aluminum tubes designed for the injection of thermoplastic materials. The special shape of the cork guarantees safe and reliable injection of the material.
Available in various diameters and lengths, for the injection of all types of removable dentures.

Villacryl Thermo Press is a polyamide-based thermoplastic material. It is dedicated to all removable dentures such as: complete dentures, partial, retention elements in framework dentures, microprothesis, splints and space maintainers.

Ready cartridges with thermoplastic material for dentures
Save time and simplify your work!
• Microcrystalline structure
• Working on a 4th class stone model
• No residual MMA monomer
• Available colors: 0, T2, T3, T4
• Villacryl Thermo Press cartridges with a diameter of 22 and 25 mm, available in two sizes: M (17 grams) and L (25 grams), available in a full range of colors

Advantages:
• Easy to process and polish
• Low absorption of fluids from the oral cavity
• Optimum flexibility and hardness of the denture
• Biocompatible pigments
• Most injection molding machines available on the market can be used
Advantages of Villacryl Thermo Press in cartridges
• The grammage of the cartridges allows for quick application of the material, accelerating and simplifying the work.
• Safe vacuum packaging guarantees the highest injection quality and trouble-free operation with each cartridge.
• The special construction of the cork ensures safe and reliable material injection.

Universal lubricant for flasks, cartridges and aluminum tubes. This material is made of high-quality, solvent-free substances. It is available in a convenient spray.

Resistant to high temperatures, Villacryl Thermo Multi Spray can be used as a release agent for all types of injection molding machines that inject thermoplastic materials for dentures.

It is perfect as a lubricant used for cartridges and aluminum tubes filled with thermoplastic material immediately before the injection process.

After spraying, it forms a thin, heat-resistant sliding layer on the surface, which guarantees protection of the injection molding machine’s heating chamber against seizing. Villacryl Thermo Multi Spray helps in a trouble-free injection process.

It will also be used as a means of increasing the durability of injection or polymerization flasks, insulates surfaces from stone and protects against rusting or tarnishing.
Advantages
• The convenient aerosol form enables quick and clean application of the material
• Solvent-free and leaves no residue in the heating chamber. Suitable for all types of injection molding machines.
• High temperature resistant
• It can be used as an auxiliary material before the injection process of thermoplastic dentures as well as for the maintenance of surfaces that are usually in contact with dental stone (e.g. polymerization flasks, injection flasks, table tops, etc.)

Acrylic – gypsum insulator. Film-forming preparation.
A film-forming preparation is used to isolate acrylic from dental gypsum. It creates a very thin and smooth film which guarantees maximum accuracy. It can be used to isolate gypsum from acrylic resins and gypsum from gypsum. A small amount of product provides effective insulation.

Advantages
• Formaldehyde free
• Bacteriostatic effect
• Enables easy separation of plaster molds after polymerization

A pressure polymerizer designed for technical and dental laboratories. Made of stainless steel INOX with a pressure gauge, it is perfect for polymerization of acrylic masses. Especially for: repairs, temporary crowns, removable orthodontic appliances, acrylic parts of frame dentures.
• Bold bottom
• Separate outlet valve
• Safe lid opening and closing mechanism

Advantages:
• Protection against uncontrolled pressure build-up
• Sufficient space for the articulator
• Adapted to polymerization of most acrylic masses

The pre-polishingpowder for acrylicresins and thermoplastic materials thatisused in place of a dentalpumice. The variedsize and sharpcontour of the grainsallowseasier and fasterpolishing to a high glosswithout the need to usedental lab siliconerubbers. The preservativeused in the powderprevents the multiplication of bacteria and fungiduringuse to ensuregreatercomfort of work.
Available in twovariants of abrasion:
regular – medium abrasive
hard – highlyabrasive.

Advantages:
• timesavingduring the pre-polishingproces
• easy to get a very high gloss by pre-preparing the polishedsurface for finalpolishing- does not require the use of dental lab siliconerubbers for smoothing-youdon’tneed to buysiliconerubbers
• preventing the multiplication of bacteria and fungiduringuse

Auxiliary product (fine-grained) for grinding and polishing of acrylic and metal reins; contains a preservative (sodium benzoate).

Advantages:
• Diversified granularity makes it possible to choose depending on the needs of the recipient.

Auxiliary product (fine-grained) for grinding and polishing of acrylic and metal reins; contains a preservative (sodium benzoate).

Advantages
• Diversified granularity makes it possible to choose depending on the needs of the recipient.

Auxiliary product (coarse-grained) for grinding and polishing of acrylic and metal reins; contains a preservative (sodium benzoate).

Advantages:
• Diversified granularity makes it possible to choose depending on the needs of the recipient.

Sandbag is a pure aluminium oxide of various grain size, intended for sandblasting and surface finishing of various materials.
• Available in three grit sizes of 50, 110 and 250 µm
• Economical 3 kg packaging

Advantages:
• High chemical purity
• Sharp-contoured grains

Polishing paste for acrylic and metal.
Universal polishing paste intended to give the final gloss to pre-smoothed surfaces. It can be used for polishing details made of acrylic resins and metals. It has good adhesion to the polished surface and does not run off during processing.

Villacryl Opaker is an acrylic material for masking metal in dentures, crowns and bridges. The material is used for frame dentures and acrylic-faced bridges.

Advantages:
• Easy to prepare and process
• Simple and effective way of hardening
• Possibility of individual selection of colours
• Heavy metals free

Self-curing, burning without residue, Form Plast is an acrylic material intended in particular for modeling prosthetic restorations, crowns, telescopic crowns, clasps, adhesive bridges, as well as for all auxiliary work in the dental technology laboratories and dental offices.
• Residue-free combustion
• Economical packaging
• Contrasting red colour

Advantages:
• Minimal polymerization shrinkage
• Short polymerization time
• Due to the quick gelation of the mass, it does not run off the plaster model

Carving wax for work in technical and dental laboratories and dental offices, to create i.a. the so-called “Construction bite” and models.
• Color: pink
• Soft

Advantages
• Optimal hardness
• Unbreakability and flexibility
• High crack resistance
• Shape stability – it does not soften and distort at body temperature (important during so-called “fitting” of a wax denture with the established teeth in the patient’s mouth)

Carving wax for work in technical and dental laboratories and dental offices, i.a. to create so-called “Construction bite” and models.
• Color: pink
• Hard

Advantages:
• Optimal hardness
• Unbreakability and flexibility
• High crack resistance
• Shape stability – it does not soften and distort at body temperature (important during the so-called “fitting” of a wax denture with the established teeth in the patient’s mouth)

Chromatic material for removing plaster and alginate residues from dentures and impression trays. Eliminates the need for onerous and time-consuming mechanical removal of plaster and alginate residues. During the dissolution of gypsum or alginates, the working solution gradually discolours.
• Contains a chromatic consumption indicator
• Powder concentrate

Advantages:
• Eliminates the need for mechanical cleaning
• Reusable

Denture Cleaner – product for professional and comprehensive cleaning of all types of removable dentures.

The Denture Cleaner liquid – effectively dissolves tartar and eliminates unpleasant odors.
Liquid
• Removes tartar
• Neutralizes unpleasant odors
• Eliminates residues and raids

Self-curing dental material in the form of a paste for temporary filling of cavities (flipper).

Advantages
• Tightly fills cavities
• Self-hardening under the influence of saliva
• Easily removable from dental cavities
• Contains bactericides and bacteriostatic agent
• Eliminates laborious mixing on the plate

Self-curing acrylic resin for the fabrication of temporary crowns and bridges and the repair of temporary crowns and bridges with acrylic veneers. Powder and liquid form. Initial crown formation and material hardening take place directly in the patient’s mouth.
• Available colors 1, 2, 3 are the closest to the VITA® A-1, A-3, A-4 shades
• Maximum curing temperature in the patient’s mouth is only 37 °C

Advantages:
• Ease of use in the dentist’s office
• Aesthetic color shades
• Low self-curing temperature
• Short self-curing time
• Well tolerated by patients
• Heavy metals free
• Biologically neutral

Villacryl IT is a self-curing acrylic material for the fabrication of individual impression trays
• Rigid and stable
• Heavy metals free
• It comes in 2 colors: green and pink

Advantages:
• Easy to prepare and process
• Works immediately after mixing
• Does not stick to hands

Villacryl STC HOT a heat-cured acrylic material for the veneering of crowns and bridges.
• Fast polymerization
• Possibility to make temporary crowns and bridges
• Possibility of veneering metal structures
• Shades based on VITA® ensure a good color match in the patient’s mouth
• Available in 10 colors shades: A1, A2, A3, A3.5, A4, B1, B2, C2, C4, D2

Advantages:
• Naturalness of the refilling
• Optimum strength and elastic properties

4Shine AC Cutter Crosscut cutters for processing acrylic resins.
4 shine cutters is a line of premium cutters made of fine-grained tungsten carbide with high hardness, designed for the needs of dental technicians in the field of acrylic and thermoplastic dentures, as well as stone processing. Each of the cutters was made on the most innovative Swiss CNC milling machines, and its quality was confirmed during rigorous and ultra-precise tests. This guarantees high concentricity accuracy and cutting efficiency.
Each of the cutters is designed for a specific stage and area of processed material, which reduces time and improves precision.

4Shine AC Cutter Crosscut cutters for processing acrylic resins.
4 shine cutters is a line of premium cutters made of fine-grained tungsten carbide with high hardness, designed for the needs of dental technicians in the field of acrylic and thermoplastic dentures, as well as stone processing. Each of the cutters was made on the most innovative Swiss CNC milling machines, and its quality was confirmed during rigorous and ultra-precise tests. This guarantees high concentricity accuracy and cutting efficiency.
Each of the cutters is designed for a specific stage and area of processed material, which reduces time and improves precision.

4Shine AC Cutter Crosscut cutters for processing acrylic resins.
4 Shine cutters is a line of premium cutters made of fine-grained tungsten carbide with high hardness, designed for the needs of dental technicians in the field of acrylic and thermoplastic dentures, as well as stone processing. Each of the cutters was made on the most innovative Swiss CNC milling machines, and its quality was confirmed during rigorous and ultra-precise tests. This guarantees high concentricity accuracy and cutting efficiency.
Each of the cutters is designed for a specific stage and area of processed material, which reduces time and improves precision.

4Shine AC Cutter Crosscut cutters for processing acrylic resins.
4 Shine cutters is a line of premium cutters made of fine-grained tungsten carbide with high hardness, designed for the needs of dental technicians in the field of acrylic and thermoplastic dentures, as well as stone processing. Each of the cutters was made on the most innovative Swiss CNC milling machines, and its quality was confirmed during rigorous and ultra-precise tests. This guarantees high concentricity accuracy and cutting efficiency.
Each of the cutters is designed for a specific stage and area of processed material, which reduces time and improves precision.

4Shine SC Cutter Crosscut cutters for processing dry and wet dental stones. 4 shine cutters is a line of premium cutters made of fine-grained tungsten carbide with high hardness, designed for the needs of dental technicians in the field of acrylic and thermoplastic dentures, as well as stone processing. Each of the cutters was made on the most innovative Swiss CNC milling machines, and its quality was confirmed during rigorous and ultra-precise tests. This guarantees high concentricity accuracy and cutting efficiency.
These are two types of cutters for processing dry and wet dental stone models.

4Shine SC Cutter Crosscut cutters for processing dry and wet dental stones. 4 shine cutters is a line of premium cutters made of fine-grained tungsten carbide with high hardness, designed for the needs of dental technicians in the field of acrylic and thermoplastic dentures, as well as stone processing. Each of the cutters was made on the most innovative Swiss CNC milling machines, and its quality was confirmed during rigorous and ultra-precise tests. This guarantees high concentricity accuracy and cutting efficiency.
These are two types of cutters for processing dry and wet dental stone models.

4Shine TC Cutter Crosswise cut cutters for processing thermoplastic materials. 4 shine cutters is a line of premium cutters made of fine-grained tungsten carbide with high hardness, designed for the needs of dental technicians in the field of acrylic and thermoplastic dentures, as well as stone processing. Each of the cutters was made on the most innovative Swiss CNC milling machines, and its quality was confirmed during rigorous and ultra-precise tests. This guarantees high concentricity accuracy and cutting efficiency.
The 4Shine TC Cutter series consists 3 types of cutters and one drill. There are perfect for both precise preparation of an artificial tooth before injection, as well as surface treatment of a denture made of thermoplastic material

4Shine TC Cutter Crosswise cut cutters for processing thermoplastic materials. 4 shine cutters is a line of premium cutters made of fine-grained tungsten carbide with high hardness, designed for the needs of dental technicians in the field of acrylic and thermoplastic dentures, as well as stone processing. Each of the cutters was made on the most innovative Swiss CNC milling machines, and its quality was confirmed during rigorous and ultra-precise tests. This guarantees high concentricity accuracy and cutting efficiency.
The 4Shine TC Cutter series consists 3 types of cutters and one drill. There are perfect for both precise preparation of an artificial tooth before injection, as well as surface treatment of a denture made of thermoplastic material.

4Shine TC Cutter Crosswise cut cutters for processing thermoplastic materials. 4 shine cutters is a line of premium cutters made of fine-grained tungsten carbide with high hardness, designed for the needs of dental technicians in the field of acrylic and thermoplastic dentures, as well as stone processing. Each of the cutters was made on the most innovative Swiss CNC milling machines, and its quality was confirmed during rigorous and ultra-precise tests. This guarantees high concentricity accuracy and cutting efficiency.
The 4Shine TC Cutter series consists 3 types of cutters and one drill. There are perfect for both precise preparation of an artificial tooth before injection, as well as surface treatment of a denture made of thermoplastic material.

4Shine TC Cutter Crosswise cut cutters for processing thermoplastic materials. 4 shine cutters is a line of premium cutters made of fine-grained tungsten carbide with high hardness, designed for the needs of dental technicians in the field of acrylic and thermoplastic dentures, as well as stone processing. Each of the cutters was made on the most innovative Swiss CNC milling machines, and its quality was confirmed during rigorous and ultra-precise tests. This guarantees high concentricity accuracy and cutting efficiency.
The 4Shine TC Cutter series consists 3 types of cutters and one drill. There are perfect for both precise preparation of an artificial tooth before injection, as well as surface treatment of a denture made of thermoplastic material.

The silicone bowl for mixing plasters, stones and alginate masses with a diameter of 4,72” (12 cm) is ergonomically shaped so that it is easy to hold in your hand when mixing plaster, dental stone or alginate mass. Thanks to the perfectly smooth inner surface of the bowl, the mixed material does not stick to the walls. The flexibility of the high-quality silicone from which the bowl is made makes it easy to clean after work.

Aesthetic, magenta-colored spatula for mixing plaster and making alginate masses, made of durable high-quality plastic. The smooth surface and shape of the mixing part are perfectly matched to the bowl, which increases the precision of work. The ergonomically shaped handle has a perfectly smooth surface that is comfortable for the user. The spatula is easy to clean and can be used in prosthetic laboratories, dental clinics as well as in beauty salons.